HP StorageWorks 6000-series Virtual Library System User Guide (AH809-96049, September 2010)

WARNING!
To reduce the risk of electric shock or damage to the equipment:
• Do not disable the power cord grounding plug. The grounding plug is an important
safety feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible
at all times.
• Unplug the power cord from the power supply to disconnect power to the equipment.
• Do not route the power cord where it can be walked on or pinched by items placed
against it. Pay particular attention to the plug, electrical outlet, and the point where the
cord extends from the node.
5. Connect the node power supplies' AC power connectors to two separate AC power sources
using the power cables provided (Figure 31).
Figure 31 Connecting the node power supplies to an AC power source
.
6. Use the strain relief clip from the node hardware kit to secure the power cord (Figure 32).
Figure 32 Securing the power cord with the strain relief clip
.
7. Connect the disk array power supply AC power connectors on the left-side to one AC power
source using the power cables provided. Then, connect the disk array power supply AC power
connectors on the right-side to a second AC power source using the power cables provided
(Figure 33).
Figure 33 Connecting the disk array power supplies to an AC power source
.
HP StorageWorks 6000–series Virtual Library System User Guide 59