HP StorageWorks X1000 Automated Storage Manager user guide (572087-001, June 2009)

• Storage tab—Displays the user-defined application's storage space, including allocated space,
used space, free space, and the following storage allocation details:
Table 21 Storage tab: User-defined application properties
ValueProperty
Path to the file directory on the application server where the user-defined
application data is saved by the user-defined application. The file dir-
ectory is located on the volume created on the iSCSI LUN that was ex-
ported by ASM to the application server.
Application Path
Communication protocol used to transfer data between the server that
hosts the user-defined application and your HP Storage System.
Protocol
Name of server that hosts the user-defined application.Application Server Host Name
Name of the volume on the application server to which the user-defined
application saves its data. The volume resides on the iSCSI LUN (logical
disk) exported by ASM to the application server.
Application Server Volume -
Name
Status of the volume on the application server where the user-defined
application data is stored.
Application Server Volume -
Status
Indicates if user-defined application storage is configured with exclusive
storage. See Table 5 on page 23 for more information.
Application Server Volume - Ex-
clusive Storage
The RAID level to which the user-defined application storage is con-
figured. See Customizing RAID levels on page 25 for more information.
Application Server Volume - RAID
Level
The RAID stripe size to which the user-defined application storage is
configured. See Table 5 on page 23 for more information.
Application Server Volume - RAID
Stripe Size
Speeds up reads when enabled. This setting is determined by the stor-
age array, not ASM.
Application Server Volume - Read
Cache
Speeds up writes when enabled. This setting is determined by the stor-
age array, not ASM.
Application Server Volume -
Write Cache
The number of hot spares with which the database component storage
is configured. See Table 5 on page 23 for more information.
Application Server Volume -
Number of Hot Spares
Path the application server volume is mounted on. The volume is built
on the iSCSI LUN exported by ASM to the application server.
Application Server Volume -
Mount Paths
• Warning Threshold tab—Allows you to change the percent full warning threshold value for the
user-defined application. See Setting a percent full warning threshold on page 26 for more inform-
ation.
• Snapshots tab — Allows you to schedule snapshots of the user-defined application. For more in-
formation, see “Scheduling and running snapshots” on page 33.
• Backup tab — Allows you to schedule backups of the user-defined application. See
“Scheduling backups” on page 36 for more information.
• Replication tab — Allows you to configure data replication of the user-defined application. See
“Running replication” on page 40 for more information.
HP StorageWorks X1000 Automated Storage Manager 57