HP StorageWorks External Storage XP user guide for the XP12000, XP10000, SVS200 (T1706-96009, October 2007)
Table 2 Storage arrays that can be connected as external arrays
Storage array
Notes
HP StorageWork
s XP12000 Disk Array
• In External Storage XP panes, the array appears
as “12000”.
• Alternate paths are in Multi mode (meaning that
dynamic load balancing across multiple active
pathsisenabled).
HP StorageWorks XP10000 Disk Array
• In External Storage XP panes, the array appears
as “10000”.
• Alternate paths are in Multi mode.
HP StorageWorks XP1024/XP128 Disk Array
• In External Storage XP panes, the arrays appear
as “1024” and “128”, respectively.
• Alternate paths are in Multi mode.
HP StorageWorks XP512/XP48 Disk Array
• In External Storage XP panes, the arrays appear
as “512” and “48”, respectively.
• Alternate paths are in Multi mode.
HP StorageWorks XP256 Disk Array
• In External Storage XP panes, the array appears
as “256”.
• Alternate paths are in Multi mode.
HP StorageWorks 200 Storage Virtualization System
• In External Storage XP panes, the array appears
as “SVS200”.
• Alternate paths are in Multi mode.
HP StorageWorks 3000/5000 Enterprise Virtual
A
rray (Active/Standby and Active/Active controllers)
o
r HP StorageWorks 4000/6000/8000 Enterprise
Virtual Array (Active/Active controllers)
• In this user guide, the arrays appear as “EVA
array”.
• In External Storage XP panes, the arrays appear
as “EVA”.
• AlternatepathsareinSinglemode(meaningthat
dynamic load balancing across multiple active
paths is not enabled).
HP StorageWorks MSA1000/1500 (Active/Standby)
• In this user guide, the arrays appear as “MSA
array”.
• In External Storage XP panes, the arrays appear
as “MSA”.
• Alternate paths are in Single mode.
TagmaStore™ Universal Storage Platform subsystem
• In this user guide, the array appears as
“TagmaStore™ USP subsystem”.
• In External Storage XP panes, the array appears
as “USP”.
• Alternate paths are in Multi mode.
TagmaStore™ Network Storage Controller subsystem
• In this user guide, the array appears as
“TagmaStore™ NSC subsystem”.
• In External Storage XP panes, the array appears
as “NSC”.
• Alternate paths are in Multi mode.
TagmaStore™ Adaptable Modular Storage subsystem
• In this user guide, the array appears as
“TagmaStore™ AMS subsystem”.
• In External Storage XP panes, the array appears
as “AMS”.
• Alternate paths are in Single mode.
18
Preparing for External Storage XP operations