6.1 HP IBRIX X9000 Network Storage System Installation Guide (TA768-96058, June 2012)

Enter the information for the blade on the Server Setup dialog box.
Review the information on the Configuration Summary that appears next, and select Commit.
7. The wizard now verifies the VC firmware and then sets up the hpspAdmin user account.
8. The wizard verifies the SAS configuration. After determining the correct layout of the storage
hardware, the wizard configures the SAS switch zoning so that couplets see the same storage.
9. The wizard powers off blade 4, applies the SAS configuration, and then reboots blade 3.
Log into blade 3 when the Linux login prompt appears.
100 Completing the X9730 Performance Module installation