6.1 HP IBRIX X9000 Network Storage System Installation Guide (TA768-96058, June 2012)

When you press F2, the following screen appears.
When you answer Yes to configure a dedicated management network, the Get Total Networks
dialog box appears. Enter the number of networks used by the existing cluster (this will typically
be 2).
8. The Confirming Onboard Administrator and Virtual Connect Settings dialog box is displayed
again, and the setup wizard configures the chassis on the X9730 system. (This step will fail
if the OA IP address has not been set up or if the blade cannot communicate with the OA.)
Installing the first expansion blade 115