6.1 HP IBRIX X9000 Network Storage System Installation Guide (TA768-96058, June 2012)

If the blade check fails, select Enter Manually and enter the information on the following dialog
box.
9. When the Join a Cluster — Step 2 dialog box appears, enter the requested information.
NOTE: Register IP is the Fusion Manager (management console) IP, not the IP you are
registering for this server.
10. The Network Configuration dialog box lists the interfaces you configured earlier. The correct
eth devices should be assigned, but you need to configure the IP addresses for those bonds.
Select a bond and then select Configure.
Installing the second expansion blade 127