6.1 HP IBRIX X9000 Network Storage System Installation Guide (TA768-96058, June 2012)
22. The wizard powers off blades 2–16, applies the SAS configuration, and then reboots blade
1. Log into blade 1 when the Linux login prompt appears.
23. The wizard takes the following actions:
• Verifies the SAS configuration to ensure that SAS zoning is set up correctly
• Powers on blades 2–16
• Verifies storage firmware to ensure that is set up correctly
• Validates the LUN layout and configures it if necessary
24. The wizard now forms bond0 from eth0 and eth3.
58 Installing X9730 systems