6.1 HP IBRIX X9000 Network Storage System Installation Guide (TA768-96058, June 2012)

Installing additional X9730 blades
Use this procedure to install blades 2–16 on an X9730 system. Complete the following procedure
on each blade:
1. Log into the blade.
2. The X9730 Setup dialog box is displayed.
3. The wizard verifies the firmware on the system and notifies you if a firmware update is needed.
IMPORTANT: HP recommends that you update the firmware before continuing with the
installation. X9730 systems have been tested with specific firmware recipes. Continuing the
installation without upgrading to a supported firmware recipe can result in a defective system.
Installing additional X9730 blades 63