6.1 HP IBRIX X9000 Network Storage System Installation Guide (TA768-96058, June 2012)

4. The wizard scans the network for existing clusters. On the Join Cluster dialog box, select the
management console (Fusion Manager) for your cluster.
You have several options at this point:
• Use the template to configure the blade. Select Ok, and go to “Configure the blade with the
template” (page 64).
• Configure the blade manually. If you did not create a template when configuring the first
blade, the following screen appears when you select Ok on the Join Cluster dialog box:
Select Enter FM IP and go to “Configure the blade manually” (page 68).
Configure the blade with the template
Complete the following steps:
64 Installing X9730 systems