6.1 HP IBRIX X9000 Network Storage System Installation Guide (TA768-96058, June 2012)

3. The installer now obtains OA/VC information from the chassis. If the installer cannot obtain
the information programmatically, the following screen will appear and you will need to enter
the OA/VC credentials manually.
4. The wizard now takes the following actions:
• Checks the OA and VC firmware and notifies you if an update is needed
• Verifies the VC configuration
• Creates the hpspAdmin user accounts on the iLOs
• Verifies the chassis configuration
• Checks the firmware on the SAS switches and notifies you if an update is needed
• Verifies the SAS configuration
• Checks the storage firmware and notifies you if an update is needed
• Verifies the storage configuration
• Sets up networking on the blade
5. On the Join a Cluster – Step 2 dialog box, enter the requested information.
NOTE: On the dialog box, Register IP is the Fusion Manager (management console) IP, not
the IP you are registering for this blade.
66 Installing X9730 systems