6.1 HP IBRIX X9000 Network Storage System Installation Guide (TA768-96058, June 2012)

2. On the Server Networking Configuration dialog box, configure this server for bond0, the
cluster network. Note the following:
• The hostname can include alphanumeric characters and the hyphen (–) special character.
It is a best practice to use only lowercase characters in hostnames; uppercase characters
can cause issues with IBRIX software. Do not use an underscore (_) in the hostname.
• The IP address is the address of the server on bond0.
• The default gateway provides a route between networks. If your default gateway is on a
different subnet than bond0, skip this field.
• VLAN capabilities provide hardware support for running multiple logical networks over
the same physical networking hardware. IBRIX supports the ability to associate a VLAN
tag with a FSN interface. For more information, see the HP IBRIX X9000 Network Storage
System Network Best Practices Guide.
3. The Configuration Summary lists your configuration. Select Commit to continue the installation.
4. The blade needs OA/VC information from the chassis. It can obtain this information directly
from blade 1, or you can enter the OA/VC credentials manually.
Installing additional X9730 blades 69