6.1 HP IBRIX X9000 Network Storage System Installation Guide (TA768-96058, June 2012)

5. The wizard now takes the following actions:
Checks the OA and VC firmware and notifies you if an update is needed
Verifies the VC configuration
Creates the hpspAdmin user accounts on the iLOs
Verifies the chassis configuration
Checks the firmware on the SAS switches and notifies you if an update is needed
Verifies the SAS configuration
Checks the storage firmware and notifies you if an update is needed
Verifies the storage configuration
Sets up networking on the blade
6. On the Join a Cluster Step 2 dialog box, enter the requested information.
NOTE: On the dialog box, Register IP is the Fusion Manager (management console) IP, not
the IP you are registering for this blade.
7. The Network Configuration dialog box lists the interfaces you configured earlier.
70 Installing X9730 systems