HP IBRIX X9720 Network Storage System Capacity Block Installation Instructions (AW549-96036, June 2012)
HP IBRIX X9720 Network
Storage System Capacity
Block (X9700c and X9700cx)
Installation Instructions
© Copyright 2012 Hewlett-Packard Development Company, L.P.
Printed in Puerto Rico
**AW549-96036**
HP Part
Number: AW549-96036
Published: June 2012
Edition: Fourth
Adding capacity blocks on X9720 systems
WARNING! To reduce the risk of personal
injury or damage to the equipment, follow these
recommendations:
• Use two people to lift, move, and install the
HP X9700c component.
• Use an appropriate lifting device to lift,
move, and install the HP X9700cx
component.
• Always extend only one component at a
time. A cabinet could become unstable if
more than one component is extended for
any reason.
CAUTION: When handling system
components, equipment may be damaged by
electrostatic discharge (ESD). Use proper
anti-static protection at all times:
• Keep the replacement component in the
ESD bag until needed.
• Wear an ESD wrist strap grounded to an
unpainted surface of the chassis.
• Touch an unpainted surface of the chassis
before handling the component.
• Never touch the connector pins.
Carton contents
• HP X9700c, containing 12 disk drives
• HP X9700cx containing 70 disk drives
• Rack mounting hardware
• Two-meter cables (quantity—4)
• Four-meter cables (quantity—2)
Page 1