6.0 HP StorageWorks X9000 File Serving Software CLI Reference (TA768-96040, October 2011)

DescriptionOption

changed even if they are in encrypted format; however, they will be decrypted by the

agent.

Specifies the agent’s SNMPv3 engine ID.-e ENGINE_ID

Lists summary information about the SNMP agent.-l

Specifies the assigned system name (generally the fully-qualified domain name) of the this

agent.

-n SYSNAME

Specifies the physical location of the MIB-II system being managed (this agent).-o SYSLOCATION

Specifies the port on which the agent listens for SNMP requests from the NMS. The default

port is 5061.

-p PORT

In SNMPv1 and v2, identifies the community name (that is, the password) used for an

SNMP get request. The default read community name is public. Used in SNMPv3 if

non-v3 read requests are allowed.

-r READCOMMUNITY

Indicates whether the agent is listening for SNMP requests on the SNMP port. The default

value is off.

-s on|off

Specifies the text id of a contact person responsible for the agent’s host system.-t SYSCONTACT

Updates an SNMP agent.-u

Indicates the version of the SNMP agent.-v 1|2|3

In SNMPv1 and v2, identifies the community name (that is, the password) used for an

SNMP set request. No default write community name is set. Used in SNMPv3 if non-v3

write requests are allowed.

-w WRITECOMMUNITY

In SNMPv3, indicates whether a v3 agent can process v1 or v2 get requests. Default: no.-y yes|no

In SNMPv3, indicates whether a v3 agent can process v1 or v2 set requests. Default: no.-z yes|no

Shows the usage for this command.-?