3.01.0a HP StoreEasy 1000 Storage Release Notes (B7D88-96057, December 2012)

Initial Configuration Tasks
Issue: On some storage system models the HP Lights-Out Online Configuration Utility displays the error
message Feature not supported when navigating to Settings > Configure iLO. The most
commonly-changed settings such as enabling DHCP, changing the iLO DNS name, adding iLO users,
or changing iLO user passwords, can still be configured using the HP Lights-Out Online Configuration
Utility's User and Network menu items.
Workaround: The settings under the Settings menu item must be configured by using the iLO ROM-Based
Setup Utility (RBSU). Press F8 when prompted at the console during system POST to open the RBSU.
Global settings that are not supported in the online utility can be configured here.
Issue: The Initial Configuration Task window displays the following message:
To complete configuration of the first node, log off and then log on again
using a domain user account with local administrative permissions.
This message appears after joining an HP StoreEasy 1000 system to a domain, and then logging on
to the system again as the local administrator. This also occurs when deploying a HP StoreEasy 3000
as a standalone system, rather than a two-node cluster.
Workaround: Perform the following steps:
1. Add a domain user as a member of the local Administrators group on the HP StoreEasy Storage
system.
2. Log off and log on again as the domain user.
The Initial Configuration Tasks window will open automatically.
3. Complete the configuration tasks.
Issue: The default setting for Windows Update is to "Install Updates Automatically". Although this is
the default setting, HP recommends that this be changed to avoid unexpected reboots and system
unavailability. For more information, see the online help, which can be launched from the Initial
Configuration Tasks Window.
Workaround: Use the ICT task to change the setting to either:
• Download updates but let me choose whether to install them.
• Check for updates but let me choose whether to download and install them.
System installation and recovery
This section describes issues related to the system installation and recovery process.
Issue: Command-line Tools and Internet Printing Client features are not installed by default with the
operating system.
Workaround: Use Server Manager to manually install these features:
1. In Server Manager, select Features and then click Add Features.
2. Select Command-line Tools (located under Windows Server Backup features) and Internet Printing
Client in the features list.
3. Click Next and complete the Add Features Wizard installation process.
Issue: The time zone selected during the image process is not retained. The image process allows you
to set the time zone; however, the time zone is always set to Pacific time when the operating system
comes up for the first time.
Workaround: Change the time zone after the system is fully imaged.
Installation instructions
Instructions for installing new systems are provided in the HP StoreEasy 1000 Storage Quick Start
Guide.
4 Installation instructions