HP X5000 G2 Network Storage System Administrator Guide

Figure 109 Reattaching the plug bracket to the coil power plug
5. Push the drive drawer fully back into the system enclosure (1, Figure 110 (page 103)) and the
handle back into place (2).
Figure 110 Pushing the drive drawer into the system enclosure
6. Replace the top back panel.
7. Replace the enclosure as described in “Inserting the system enclosure into the rack” (page 68).
Removing and replacing the enclosure rails
Removing the enclosure rails
1. Power off the system as described in “Powering the storage system off and on” (page 60).
2. Remove the enclosure as described in “Removing the system enclosure from the rack” (page 67).
Removing and replacing the enclosure rails 103