HP X5000 G2 Network Storage System Administrator Guide

4. Place the server blade on a flat, level work surface.
WARNING! To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server blade
before beginning any installation procedure. Improper grounding can cause ESD damage.
Replacing the server blade
1. Install the server blade (1, Figure 122 (page 109)), and then push the handle into place with
the handle open (2).
Figure 122 Replacing the server blade
2. Power on the server blade.
3. Confirm that the system has resumed normal operations.
Removing and replacing the server blade hard drive
Removing the server blade hard drive
1. Verify the failed component as described in “Verifying component failure” (page 66).
2. Back up all data on the hard drive.
Removing and replacing the server blade hard drive 109