HP X5000 G2 Network Storage System Administrator Guide

POWEROFF ENCLOSURE
Syntax
POWEROFF ENCLOSURE
Description
The EM removes main DC power from the enclosure (just as if the user had pressed the enclosure
power-button. Servers are NOT automatically sent a graceful shutdown command; that should be
done prior to issuing this command using POWEROFF SERVER. Except when in script mode, the
user is prompted for an explicit confirmation, which must be given, or the command is terminated.
Restrictions
None
POWERON ENCLOSURE
Syntax
POWERON ENCLOSURE
Description
The EM sends a command to the health monitor to enable main DC power (just as if the user had
pressed the enclosure power button).
Restrictions
None
UPLOAD CONFIG
Syntax
UPLOAD CONFIG {<URL>}
Description
Uploads a script to the specified URL, which duplicates the current runtime configuration. Supported
protocols are FTP and TFTP. The URL should be formatted as: protocol://host/path/
filename. If your FTP server does not support anonymous logins, you can specify a username
and password within the URL formatted as: ftp://username:password@host/path/
filename
Restrictions
Only IPv4 is supported in EM version 1.0 or later.
SET EM NAME
Syntax
SET EM NAME "<EM name>"
Description
Sets the user defined string reported with SHOW EM STATUS. The system responds with confirmation
of the change. The default EM name is “EM-<mac address>” where <mac-address> is the
hardware Ethernet address for the iLO port on the EMU. For example, EM-78E7D1C12074.
150 Managing the EMU