HP X5000 G2 Network Storage System Administrator Guide

Restrictions
<EM name> must be 1 to 32 characters long and includes all alphanumeric, underscore (_) , and
hyphen (-) characters.
SET ENCLOSURE ASSET
Syntax
SET ENCLOSURE ASSET [TAG] "<asset tag>"
Description
Sets the enclosure asset tag that is stored persistently in the EM, displayed with SHOW ENCLOSURE
INFO command.
Restrictions
<asset tag> must be 1 to 32 characters long and includes all alphanumeric, underscore (_)
and hyphen (-) characters.
SET ENCLOSURE ID
Syntax
SET ENCLOSURE ID <id>
Description
Sets the persistent enclosure ID in the EM. This ID is displayed on the 2-digit LED display on the
EMU module, displayed with SHOW ENCLOSURE INFO command and is provided to the
StorageWorks 1200m HBA in the MEZZ2 slot of the server through the MEZZPOS CLP string. The
command takes effect immediately.
IMPORTANT: Do not change the enclosure ID. You will be unable to access the data volumes
from the servers.
Restrictions
<id> is a decimal integer from 0 to 99.
SET ENCLOSURE NAME
Syntax
SET ENCLOSURE NAME "<enclosure name>"
Description
Sets the persistent enclosure name stored in the EM. This name is displayed with SHOW ENCLOSURE
INFO command. The default (unset by user) value is ‘UnnamedEnclosure’.
Restrictions
<enclosure name> must be 1 to 32 characters long and includes all alphanumeric, underscore
(_), and hyphen (-) characters.
SET ENCLOSURE UID
Syntax
SET ENCLOSURE UID { ON | OFF | SLOW | FAST }
Enclosure control 151