HP X5000 G2 Network Storage System Administrator Guide

3. Configure iLO on the server blades:
a. Open a web browser and log in to iLO using the address: http://10.0.0.11. You
are prompted to enter the user name and password. The password for the Administrator
account is located on a pull out tag on the front of the server blade.
After you have logged into iLO, HP recommends that you change the administrator
password. To do so, select User Administration under Administration in the iLO
management interface.
b. Configure the network as required for your environment. Select Network under
Administration in the iLO management interface. You can either enable DHCP or edit the
IP address details and enter site-specific network settings. Click Apply to save your settings.
c. Repeat the process on the other server blade. Open a web browser and log in to iLO
using the address: http://10.0.0.12.
16 Installing the storage system