HP X5000 G2 Network Storage System Administrator Guide

Figure 14 Alert and Email settings
5. Complete the following fields:
• Name—Enter the name of a recipient (for example, John Doe).
• Recipient address—Enter the email address of the recipient (for example,
[e-mail]).
• From address—Enter an email address that will display to the recipient indicating where
the message originated. It can be the same as the recipient address, if desired.
• SMTP address—Enter a valid SMTP address (for example, SMTP.company.com).
• Alerts Severity—Select the severity for which you want to receive alerts. You will also
receive alerts for any severity higher than the one you select. Select All to receive alerts
for all severities.
• Components Alerts—Select the components for which you want to receive alerts, or select
All to receive alerts for all components.
6. To test the ability for the recipient to receive email alerts, click Send Test Email. If the recipient
receives the test email, no further action is required. If the test email is not received, check
that the information entered for the recipient is correct.
24 Monitoring and troubleshooting the storage system