HP X5000 G2 Network Storage System Administrator Guide

Storage
This section displays information about the following components:
• Storage System—Links to the page that displays information about storage in the drive drawer
and any external disk enclosures. This storage is managed by the 1210m controller.
• Smart array subsystem—Links to the page that displays information about operating system
drives and smart array controllers.
NOTE: The SMH will display a total of four power supplies for each External Storage Enclosure.
If there is more than one External Storage Enclosure connected, the SMH may not show the correct
number of power supplies for each of these enclosures.
The Storage System page is organized as a left panel and a main page:
Figure 19 Storage system
The left panel provides links to information about the following items:
• Controller
Select a storage controller to view its type, status, firmware version, and serial number.
• Logical Drives
A list of logical drives associated with the controller appears in the left panel tree view. Select
one of the logical drive entries to display the status of the drive, fault tolerance (RAID level),
and capacity (volume size). A link to the logical drive storage pool is also displayed.
• Storage Pools
A list of storage pools associated with the controller displays in the left panel tree view. Select
one of the pool entries to display its status, capacity, communication status with the controller,
primordial state, and cache properties.
NOTE: If read or write cache is enabled the value displayed is 2; otherwise, the value is 3.
The Storage Pools page also displays a list of disk drives and storage volumes present in the
pool.
Under the Physical Drives tree, the list of disk enclosures is displayed. Under each enclosure,
the list of disk drives present in each disk enclosures is displayed. When there is no drive in
HP System Management Homepage 29