HP X5000 G2 Network Storage System Administrator Guide

Figure 28 Enclosure Manager unit LEDs
Table 6 Enclosure manager unit LEDs status
StatusDescriptionItem
The LED blinks during power-up, but then the display changes only in
response to commands from the Enclosure Manager Display.
EM display1
Amber flashing/green LED off = issue. Use the CLI commands SHOW
ENCLOSURE STATUS and SHOW SYSLOG EM to determine possible
fault causes.
EM fault LED2
The health LED is only green and is either on (Healthy) or off (Power
off or Faulted).
EM health LED3
LEDs are off when the enclosure is powered off.
Figure 29 HP 2-port 1 GB Ethernet I/O modules LEDs
Table 7 HP 2-port 1 GB Ethernet I/O modules LEDs status
StatusDescriptionItem
Solid green when module health is goodModule health LED1
OFF* when module has failed
Solid amber when module has failedModule fault LED2
OFF* when module health is good
*LEDs are off when enclosure is powered off.
38 Monitoring and troubleshooting the storage system