HP X5000 G2 Network Storage System Administrator Guide

Figure 32 Power supply LEDs
Table 10 Power supply LED status
StatusDescriptionItem
Green = Power on and power supply functioning properly.Power supply1
OFF = One or more of the following conditions exists:
System powered off, AC power unavailable, Power supply
failed, Power supply exceeded current limit. Use the CLI
command SHOW ENCLOSURE POWERSUPLY STATUS
ALL for more details.
Figure 33 Chassis switches and indicator LEDs
Table 11 Chassis switches and indicator LEDs status
StatusDescriptionItem
Solid blue = Requires service check.UID1
Solid green when system health is good.Chassis health2
OFF if a module or component in the system has failed
Flashing amber if a module or component in the system has
failed.
NOTE: The amber chassis fault LED flashes if any
component fault is detected by the System Management
Homepage. A fault can be as minor as a cable unplugged
from a NIC port, and therefore may not be cause for
concern.
Chassis fault3
40 Monitoring and troubleshooting the storage system