HP X5000 G2 Network Storage System Administrator Guide

Table 13 Known issues (continued)
ResolutionIssue
The use of this registry key is documented at http://support.microsoft.com/
kb/824344.
iSCSI Software Target service
on MACHINE_NAME. Error 1053:
The service did not respond
to the start or control
request in a timely manner.
The UID LED cannot be enabled or disabled in the System Management
Home page until the Enclosure Manager key has been generated. The
Enclosure Manager key can be generated using the System Manager snap-in.
The Enclosure UID page that is part of
the HP System Management Homepage
cannot be used to enable or disable the
UID status LED.
When selecting Provide cluster name and domain in the ICT you need:There is difficulty in setting up a storage
system with clustering with insufficient
administrative privileges.
• An Active Directory domain where both nodes will be joined as member
servers.
• A domain user account that has Create Computer Objects and Read All
Properties permissions.
The reboot time for the network storage system is approximately six to seven
minutes.
Length of network storage system reboot
time
This issue can be resolved by doing one of the following:A cluster network interface reports status
(from cluster net or cluster
• Allow 12–24 hours to pass for the Microsoft Failover Cluster Manager to
resolve the issue automatically.
netint command or Failover Cluster
Manager) as “network partitioned” when
• Manually restart the node that was restarted or affected.
a cluster node is rebooted and rejoins
the cluster. The network interface is still
• Manually disable or enable the NIC on the affected cluster node that is
causing the issue, under Network Connections.
usable for communications to other
nodes; it is only the communications
between the cluster nodes that is
affected. The cluster interface status will
change after 12–24 hours. This issue is
intermittent and takes approximately
30–50 reboots of a node to reproduce.
FSRM only configures its config store in the cluster database when the FSRM
service starts. To resolve this issue, reboot one node in the cluster, or you
File Server Resource Manager (FSRM)
displays the error message: File
can start/stop the FSRM services by issuing the following commands on the
command line using elevated privileges:
Server Resource Manager
global configuration cannot
net stop srmsvc
be accessed since it is not
installed yet.
net stop srmreports
net start srmreports
net start srmsvc
This issue is documented by Microsoft at:
http://technet.microsoft.com/en-us/library/gg214171(WS.10).aspx
The HP X5000 G2 Network Storage System does not have a VDS Hardware
Provider, so the following utilities do not work:
Several utilities do not operate with the
HP X5000 G2 Network Storage System.
• The Microsoft Storage Manager for SAN (Server Manager+Storage+SMFS)
• Diskraid (command line utility)
• Provision Storage link from Share and Storage Management MMC (Server
Manager+Roles+File Services+Share and Storage Management)
44 Monitoring and troubleshooting the storage system