HP X5000 G2 Network Storage System Administrator Guide

8. Complete the following (Figure 72 (page 83)):
a. Unplug the power cable from the server blade backplane by pinching the plug release
mechanism (1).
b. Remove the screw (2).
c. Remove the server blade backplane from the enclosure (3).
Figure 72 Removing the server blade backplane
Replacing the server blade backplane
1. Complete the following (Figure 73 (page 83)):
a. Install the replacement server blade backplane (1).
b. Replace the screw (2).
c. Plug in the power cable (3).
Figure 73 Installing the server blade backplane
2. Replace the large baffle on the bottom of the enclosure.
3. Replace the small baffle beside the server blade backplane.
Removing and replacing the server blade backplane 83