HP X5000 G2 Network Storage System Administrator Guide

2 Installing the storage system
This chapter explains how to install the storage system hardware.
Verify the kit contents
Remove the contents, ensuring that you have all of the following components. If components are
missing, contact HP technical support.
Hardware
• HP X5000 G2 Network Storage System
NOTE: External disk enclosures are not included with the storage system, but up to four
D2600 or D2700 disk enclosures may be connected to the storage system.
• Rail kit
• Power cords
Media and documentation
• HP X5000 G2 Network Storage System Quick Start Guide
• HP ProLiant Essentials Integrated Lights-Out Advanced Pack
• End User License Agreement
• HP X5000 G2 System Recovery DVD
• Certificate of Authenticity Card
• Safety and Disposal Documentation CD
Locate and record the product number, serial number, and SAID number
Before you begin installation, locate and record the product number of the storage system, serial
number, and support contract service agreement ID (SAID) number.
The product number of the storage system and serial number are located in three places:
• Top of the storage system
• Back of the storage system on a pull-out tab
• On the storage system shipping box
The SAID number is listed on your service contract agreement (see “Obtaining the Service Agreement
ID” (page 54)).
Unpack and rack the storage system hardware
WARNING! The storage system enclosure is heavy. Always use at least two people to move the
storage system into the rack.
Verify the kit contents 9