HP X5000 G2 Network Storage System Administrator Guide

Figure 88 Removing the SAS I/O module
8. Extend the drive drawer (Figure 45 (page 67)):
a. Press upward on the release button on the hard drive drawer (1).
b. Pull the drawer handle down 90 degrees (2).
c. Extend the hard drive drawer (3).
Figure 89 Extending the hard drive drawer
NOTE: You must repeat Step 8 for the remaining SAS I/O module.
9. Remove the plug bracket (2, Figure 90 (page 93)) from the coil power plug by removing the
thumbscrew (1).
92 Removing and replacing hardware components