HP X5000 G2 Network Storage System Administrator Guide

Figure 90 Removing the plug bracket from the coil power plug
10. Unplug the coil power assembly from the midplane board (Figure 91 (page 93)).
Figure 91 Unplugging the coil power assembly
11. Press the release mechanism on the side rail (1, Figure 92 (page 93)), and then pull the hard
drive drawer fully out of the enclosure (2).
WARNING! The hard drive drawer is heavy, even after removing the hard drives. Make
sure the drawer is fully supported as you remove it from the enclosure.
Figure 92 Removing the drive drawer
Removing and replacing a drive drawer 93