HP X5000 G2 Network Storage System Administrator Guide

2. Extend the hard drive drawer (Figure 98 (page 97)):
a. Press upward on the release button on the hard drive drawer (1).
b. Pull the drawer handle down 90 degrees (2).
c. Extend the hard drive drawer (3).
Figure 98 Extending the hard drive drawer
3. Locate the failed hard drive.
NOTE: Use the hard drive bay labels and the drive LED status (an amber LED or no LEDs)
to help identify the failed drive.
4. To remove the failed hard drive (Figure 99 (page 97)):
a. Press the release button (1).
b. Pull the release lever (2).
c. Remove the hard drive (3).
Figure 99 Remove the failed hard drive
Removing and replacing the drive drawer hard drive 97