HP StoreEver 1/8 G2 Tape Autoloader Firmware Release Notes Firmware version 4.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
Version: 4.00 Description This release includes updated firmware for the HP StoreEver 1/8 G2 Tape Autoloader. The autoloader firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP) using a USB flash drive. • HP Library and Tape Tools (L&TT). Autoloader firmware version 4.00 Compatible robotics firmware version 2.50e Update recommendation Recommended IMPORTANT: Firmware version 3.90 has been recalled and is no longer available.
load the next tape in sequence after the cleaning completes, it only returns the cleaning tape its original slot. • The autoloader now supports use of SNMP community strings containing the underscore character (“_”). • Fixed a case where the autoloader address was not changed from a static address to a DHCP address on the SCSI Inquiry Page until the autoloader rebooted.
8. When the upgrade is complete, remove the USB flash drive from the USB port. To upgrade firmware using L&TT: 1. 2. 3. 4. 5. 6. Download and install the current version of HP Library & Tape Tools (L&TT) from the HP website: www.hp.com/support/tapetools. Download current firmware using L&TT. Click the device to update in the device list. Click Firmware on the main toolbar. On the Update Firmware tab, select the box next to each device for which you want to update firmware.
