HP StorageWorks 1/8 G2 Tape Autoloader firmware release notes Firmware version 2.50 (AK377-96008, December 2008)

HP StorageWorks 1/8 G2 Tape

Autoloader firmware release notes

Firmware version 2.50

Part number: AK377-96008

First edition: December 16, 2008

PAGE 1
HP StorageWorks 1/8 G2 Tape Autoloader firmware release notes Firmware version 2.
PAGE 3
Version: 2.50 Description This release includes updated firmware for the HP StorageWorks 1/8 G2 Tape Autoloader . The Autoloader firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP). • HP Library and Tape Tools (L&TT). Autoloader firmware version • 2.50 Update recommendation Supersedes Recommended All previous versions of Autoloader firmware.
PAGE 4
• Fixed a case where some pieces of tape media were marked as Invalid Cartridge after a Load/Unload Timeout error. • Fixed a case where the OCP could become unresponsive after closing the mailslot. • Fixed a case where the mailslot opened unintentionally during a move operation to the front storage slot on the right side magazine.
PAGE 5
To upgrade firmware from the OCP using a USB flash drive: 1. Download current firmware using HP Library & Tape Tools or from the HP support website: http:/ /www.hp.com/support/storage. Copy the firmware onto the USB flash drive. 2. Insert the USB flash drive into the USB port on the back of the Autoloader. 3. From the Home screen, press Next until the screen displays Support. Press Enter to select. 4. Press Next until the screen displays Autoloader FW upgrade. Press Enter to select. 5.
PAGE 6