HP StoreEver MSL2024 Tape Library Firmware Release Notes Firmware version 5.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
Version: 5.90 Description This release includes updated firmware for the HP StoreEver MSL2024 Tape Library. The firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP) using a USB flash drive. • HP Library and Tape Tools (L&TT). Library firmware version 5.90 Compatible robotics firmware version 3.20e Update recommendation Recommended IMPORTANT: Firmware version 5.80 has been recalled and is no longer available.
the next tape in sequence after the cleaning completes, it only returns the cleaning tape its original slot. • The library now supports use of SNMP community strings containing the underscore character (“_”). • Fixed a case where the library address was not changed from a static address to a DHCP address on the SCSI Inquiry Page until the library rebooted.
8. When the upgrade is complete, remove the USB flash drive from the USB port. To upgrade firmware using L&TT: 1. 2. 3. 4. 5. 6. Download and install the current version of HP Library & Tape Tools (L&TT) from the HP website: www.hp.com/support/tapetools. Download current firmware using L&TT. Click the device to update in the device list. Click Firmware on the main toolbar. On the Update Firmware tab, select the box next to each device for which you want to update firmware.
Effective date February 1, 2013 6 Effective date
