HP StorageWorks 1/8 G2 Tape Autoloader firmware release notes Firmware version 3.
Legal and notice information © Copyright 2011 Hewlett-Packard Development Company, L.P.
Version: 3.50 Description This release includes updated firmware for the HP StorageWorks 1/8 G2 Tape Autoloader . The Autoloader firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP) using a USB flash drive. • HP Library and Tape Tools (L&TT). Autoloader firmware version 3.50 Compatible robotics firmware version Update recommendation Supersedes 2.40e Recommended All previous versions of Autoloader firmware.
Compatibility note When using firmware version 2.50 or newer revisions with the Encryption Kit, any key server tokens set with an odd number of characters for the PIN will not be totally backwards compatible in Autoloaders or Libraries with code revisions 2.10, 4.00, 6.30, or 8.70. In those cases, a token in an Autoloader or Library with 2.10, 4.00, 6.30, or 8.
Determining current version To find the version of firmware installed on the Autoloader from the RMI, see the Support: Firmware screen. To find the version of firmware installed on the Autoloader from the OCP: 1. From the Home screen, press Next until the screen displays Status/Information. Press Enter to select. 2. Press Next until the screen displays Autoloader information. Press Enter to select. 3. Press Next until the screen displays Firmware rev.. Press Enter to select.
