HP StoreEver MSL Tape Libraries Ultrium 1840 Tape Drive Firmware Release Notes Fibre Channel firmware version H6AW (AK378-96063, June 2013)

HP StoreEver MSL Tape Libraries Ultrium 1840

Tape Drive Firmware Release Notes

Fibre Channel firmware version H6AW

HP Part Number: AK378-96063

Published: May 29, 2013

Edition: First

PAGE 1
HP StoreEver MSL Tape Libraries Ultrium 1840 Tape Drive Firmware Release Notes Fibre Channel firmware version H6AW HP Part Number: AK378-96063 Published: May 29, 2013 Edition: First
PAGE 2
Description This release includes updated tape drive firmware for Ultrium 1840 full-height parallel SCSI and Fibre Channel HP StoreEver MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries. The tape drive firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP). • HP Library and Tape Tools (L&TT). Update recommendation Recommended Supersedes All earlier versions of tape drive firmware.
PAGE 3
6. 7. 8. Press Next until the screen displays the filename of the tape drive firmware file on the USB drive. Press Enter to select the firmware file. If the upgrade failed, press Enter to display the error code and message describing the cause of the failure. When the upgrade is complete, remove the USB flash drive from the USB port. MSL4048, MSL80848, or MSL8096 OCP To upgrade firmware from the MSL4048, MSL80848, or MSL8096 OCP using a USB flash drive: 1.