HP DDS/DAT drives UNIX, Linux and OpenVMS configuration guide (DW049-90915, November 2009)

HP (HP-UX) servers and workstations12
Use the ‘sam’ utility. Sam runs as a mouse-driven GUI (Figure 1) on a system with full graphics
capability, or as a console text-based interface (Figure 2). If you use the text-based interface, use the
Tab and arrow keys to navigate, and the Return key to select.
Figure 1 SAM GUI
Figure 2 SAM text-based interface
For HP-UX 11i v1 (HP-UX 11.11)
1. Enter sam at the command line.
% sam
2. Select the following: