HP StoreEver Enterprise Systems Library (ESL) G3 Tape Library Controller Hardware Revision 2 Robot Replacement Instructions

8. Click Prepare.
The library finishes the current command and begins to report Becoming Ready status to hosts.
If this happens, a dialog box appears on the screen, stating that it is safe to open the door, and
the 10-minute timer starts counting down.
9. Wait for the Attention! dialog box to appear, letting you know that it is safe to open the door.
10. Click OK to close the dialog box. (The dialog box closes on its own after 15 seconds.)
12 Step 2: Preparing the library