HP StoreEver Enterprise Systems Library (ESL) G3 Tape Library Controller Hardware Revision 2 Robot Replacement Instructions

25. From the main menu, select Tools→Library→Robot State. This screen highlights robot status and
version. If no additional replacement procedures are necessary, click Cancel.
Step 5: Packing up the failed robot
To pack up the failed robot:
1. Install the shipping restraint that you removed from the new robot into the failed robot:
a. Disengage the kickstand of the failed robot.
b. With the robot still lying on its side, note the two holes on the rear side of the picker where
the two posts of the robot restraint fit.
Step 5: Packing up the failed robot 27