HP StoreEver Enterprise Systems Library (ESL) G3 Tape Library Controller Hardware Revision 2 Robot Replacement Instructions

Figure 21 Tightening the robot restraint thumbscrews
1. Robot restraint thumbscrews
2. Robot handle
2. Lift the failed robot and place it in the FRU packaging.
3. Send the failed robot back to HP.
Regulatory information
For important safety, environmental, and regulatory information, see Safety and Compliance Information
for Server, Storage, Power, Networking, and Rack Products, available at http://www.hp.com/support/
Safety-Compliance-EnterpriseProducts.
Documentation feedback
Send any errors, suggestions, or comments to Documentation Feedback ([e-mail]).
Regulatory information 29