HP StoreEver Enterprise Systems Library (ESL) G3 Tape Library Controller Hardware Revision 2 Robot Replacement Instructions

5. Referring to Figure 4, remove the robot shipping restraint:
a. Unscrew two captive thumbscrews on the front of the picker that secure the restraint.
b. Tilt the top of the restraint toward you slightly to disengage two pins in the bottom of the
restraint from two holes on the back side of the picker, then lift out the restraint. Sometimes
the pins are tight, and it may be easier to push the restraint down and through to the rear of
the robot and remove the restraint from the rear.
c. Place the shipping restraint in the discard pile.
Figure 4 Removing the robot shipping restraint
1. Robot shipping restraint thumbscrews
Step 1: Unpacking and preparing the new robot 7