HP StoreEver High Availability Path Failover HP-UX Driver Release Notes (5697-3327, June 2014)

Prerequisites
The following are required before installing advanced path failover:
• Host computer with a supported operating system. See “Operating systems ” (page 3).
• Q-series or E-Series HBA
• Dual SAN Fibre Channel fabric configuration
• Compatible library and drive firmware. For minimum firmware requirements, see “Compatibility”
(page 3).
See the SAN Design Guidelines and EBS Compatibility Matrix, which contains supported HBAs and
ISV applications, on the HP Enterprise Backup Solutions (EBS) website for additional information.
http://www.hp.com/go/ebs
Installation instructions
See the HP StoreEver Tape Libraries Failover User Guide for installation instructions.
Related information
For additional information, see these HP web sites:
• http://www.hp.com
• http://www.hp.com/go/storage
• http://www.hp.com/service_locator
• http://www.hp.com/support/manuals
Available documents include:
• HP StoreEver Tape Libraries Failover User Guide
• HP StoreEver Enterprise Systems Library (ESL) G3 Tape Library User Guide
• HP StoreEver MSL6480 Tape Library User and Service Guide
Documentation feedback
HP is committed to providing documentation that meets your needs. To help us improve the
documentation, send any errors, suggestions, or comments to Documentation Feedback
([e-mail]). Include the document title and part number, version number, or the URL when
submitting your feedback.
Prerequisites 5