HP StoreEver Enterprise Service Library G3 Ethernet Expansion Blade Installation and Replacement Instructions (QP008-96005, May 2013)

NOTE: After you replace the EEB, the CMB
ensures that the EEB is loaded with the proper
firmware. This firmware is based on the currently
installed level of library firmware on the MCB.
If the autoleveling process fails, the EEB
becomes inoperable and the library creates an
event to report the issue. For information about
the CMB, MCB, and library support tickets, see
HP StoreEver Enterprise System Library G3 (ESL
G3) Tape Library User Guide.
HP web sites
For additional information, see these HP web sites:
• http://www.hp.com
• http://www.hp.com/go/storage
• http://www.hp.com/service_locator
• http://www.hp.com/support/manuals
Page 4