HP StoreEver Tape Libraries Failover User Guide (5697-3323, June 2014)

Table Of Contents
Verifying data path failover
After data path failover is enabled:
1. Navigate to the Status > Drive Status screen, expanding the section for the drive to see the
details.
2. Expand the section for each drive to see the details. The Data Path Failover field will show
the type of data path failover configured.
Verify that the interface status for both ports is Login complete.
3. From the host, verify connectivity to the drive.
30 Configuring failover for HP StoreEver MSL6840 Tape Libraries