application notes hp StorageWorks Fibre Channel interface controller implementation issues Fifth Edition (June 2003) Part Number: 284231-005 This document provides information on configuration issues and options not discussed in the HP StorageWorks Fibre Channel Interface Controller User Guides. For the latest version of these Application Notes and other HP StorageWorks documentation, access the HP storage website at: http://www.hp.com.
© Hewlett-Packard Company, 2003. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected by copyright.
Application Notes Contents Application Notes Contents These Application Notes cover the following major topics: ■ Microsoft® Windows 2000 Device Driver, page 4 ■ Backup Exec and Microsoft Cluster Support, page 4 ■ NetWare Environment Considerations, page 5 ■ Heterogeneous Windows and NetWare Environment Limitations, page 5 ■ KGPSA HBA Error Recovery Settings, page 6 ■ Creating Maps in OpenVMS and Large Storage Area Network (SAN) Environments, page 7 ■ Creating HP-UX Maps, page 8 Intended Audi
Microsoft® Windows 2000 Device Driver Microsoft® Windows 2000 Device Driver The Fibre Channel (FC) Interface Controller supports a set of SCSI-3 commands that can be received as FCP commands over the Fibre Channel bus. A requirement for support of these commands is the presence of a controller LUN in the Fibre Channel LUN map.
NetWare Environment Considerations NetWare Environment Considerations NetWare servers utilizing the Compaq Fibre Channel Host Bus Adapters, must enable the FC Interface Controller’s Force FCP Response Code setting. This setting is enabled/disabled on a per FC port basis and can be set via the FC Interface Controller’s browser interface, FC Configuration Settings menu.
KGPSA HBA Error Recovery Settings KGPSA HBA Error Recovery Settings The ResetTPRLO (Third Party Process Logout) driver parameter for cpqkgpsa.sys Fibre channel driver versions 4.82 and later, is set to a default value of 1. For Enterprise Backup Solutions (EBS) configurations, HP recommends changing the ResetTPRLO parameter setting to 2.
Creating Maps in OpenVMS and Large Storage Area Network (SAN) Environments Creating Maps in OpenVMS and Large Storage Area Network (SAN) Environments The following instructions describe how to create an indexed map in OpenVMS and large SAN environments using the Visual Manager (VM) user interface. To see VM screen illustrations, and additional information on maps, refer to the HP StorageWorks FC Interface Controller User Guide. 1. Access the VM home page. 2. Select Mapping.
Creating HP-UX Maps Creating HP-UX Maps The following instructions describe how to create an indexed map, in an HP-UX environment, using the Visual Manager user interface (VM). To see VM screen illustrations and additional information on maps, refer to the HP StorageWorks FC Interface Controller User Guide. 1. Access the VM home page. 2. Select Mapping. When prompted, enter the user name and password in the Login dialog box. The map settings are displayed.
