HP StorageWorks Ultrium Full-Height SCSI Tape Drives User Guide (EH853-90905, August 2007)

Figure 26 SCSI termination on a single Ultrium tape drive
If you have more than one device on the SCSI bus, daisy-chain them by connecting an LVD-rated cable
from the SCSI-OUT connector on the first device to the SCSI-IN c onnector on the second device. Assuming
you have t wo Ultrium tape drives connected, the enclosure on the second drive provides termination.
The green ACT Term LED on the rear of the firstdrivewillbeoffwhileontherearoftheseconddriveit
will be on. If the second device is not an Ultrium external drive, make sure that it is terminated using an
LVD-rated multimode terminator.
Ultrium full-height SCSI Tape D rives
73