HP StorageWorks Ultrium Full-Height SCSI Tape Drives User Guide (EH853-90905, August 2007)

Table 5 Electrical specification s, external drives
Ultrium 1840 Ultrium 960 Ultrium 460
Power consumpt
ion
13 Wat ts idle,
26 Watts typica
l,
40 Watts maximu
m
12 Wat ts idle,
30 Watts typica
l,
35 Watts maximu
m
11 Watts idle,
25 Watts typica
l,
38 Watts maximu
m
Power requirements
100–240 VAC
50-60 Hz, auto-ranging
0.7A maximum
100–240 VAC
50-60 Hz, auto-ranging
0.8A maximum
100–240 VAC
50-60 Hz, auto-ranging
0.7A maximum
1. Plug the power cable securely into the socket on the rear panel of the drive.
2. Plug the other end of the power cable into the power outlet. The power on/off switch is on the
front panel, see Figure 13.
1
Power cable
2
P ower on/off switch
Figure 13 Connecting the power cable
34
Installing an external Ultrium tape drive