HP StorageWorks MSL2024 Tape Library firmware release notes Firmware version 4.40 (AK378-96011, December 2008)

ManualsBrandsHP ManualsStorageHP StoreEver MSL2024 1 LTO-6 Ultrium 6250 FC Tape Library

HP StorageWorks MSL2024 Tape

Library firmware release notes

Firmware version 4.40

Part number: AK378-96011

First edition: December 16, 2008

Summary of content (6 pages)

PAGE 1
HP StorageWorks MSL2024 Tape Library firmware release notes Firmware version 4.
PAGE 3
Version: 4.40 Description This release includes updated firmware for the HP StorageWorks MSL2024 Tape Library. The firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP). • HP Library and Tape Tools (L&TT). Library firmware version • 4.40 Update recommendation Supersedes Recommended All previous versions of Library firmware.
PAGE 4
• Fixed a case where some pieces of tape media were marked as Invalid Cartridge after a Load/Unload Timeout error. • Fixed a case where the OCP could become unresponsive after closing the mailslot. • Fixed a case where the mailslot opened unintentionally during a move operation to the front storage slot on the right side magazine.
PAGE 5
1. Download current firmware using HP Library & Tape Tools or from the HP support website: http:/ /www.hp.com/support/storage. Copy the firmware onto the USB flash drive. 2. Insert the USB flash drive into the USB port on the back of the Autoloader. 3. From the Home screen, press Next until the screen displays Support. Press Enter to select. 4. Press Next until the screen displays Autoloader FW upgrade. Press Enter to select. 5. Enter the administrator password if prompted. 6.
PAGE 6
All versions not listed are inactive. Versions marked manufacturing only are not available for download. Firmware Version Released Status 1.91 5/31/2006 Active — bridge only 4.20 8/11/2008 Active 4.