HP StorageWorks MSL4048 Tape Library firmware release notes: Firmware version 7.30 (AK380-96011, September 2010)

ManualsBrandsHP ManualsStorageHP StoreEver MSL2024 2 LTO-6 Ultrium 6250 SAS Tape Library

HP StorageWorks MSL4048 Tape

Library firmware release notes

Firmware version 7.30

Part Number: AK380-96011

First edition: September 20, 2010

Summary of content (6 pages)

PAGE 1
HP StorageWorks MSL4048 Tape Library firmware release notes Firmware version 7.
PAGE 3
Version: 7.30 Description This release includes updated firmware for the HP StorageWorks MSL4048 Tape Library. The firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP) using a USB flash drive. • HP Library and Tape Tools (L&TT). Library firmware version 7.30 Compatible robotics firmware version Update recommendation Supersedes 3.00e Recommended All previous versions of Library firmware.
PAGE 4
• The cleaning tape barcode label is now recorded into the cartridge memory for LTO-4 and LTO5 drives. • Fixed a case where the drive status displayed as READY on the OCP and RMI while the drive was not connected. The drive status now displays OFFLINE when the drive status is not ready. • Fixed a case where, during initialization, a Library with two LTO-5 drives falsely reported that Drive 2 was an LTO-4 drive and needed a firmware update to support encryption.
PAGE 5
6. Click Start Update at the bottom of the screen to begin the update. Determining current version To find the version of firmware installed on the Library, see the RMI Support: Firmware screen or the OCP Info > Library Identity option. Supersedes history All versions not listed are inactive. Versions marked manufacturing only are not available for download. Table 1 MSL4048 firmware versions Firmware version Released Status 7.20 3/22/2010 Active 7.
PAGE 6