HP Interface Manager and Command View for Tape Libraries 3.7 User Guide

Examples To generate a support ticket for the Interface Manager card:

/>save mgmt lttsupportticket

Generating support ticket done

You can get your support ticket by using anonymous FTP.

See also save drive lttsupportticket

save interface lttsupportticket

save library lttsupportticket

save system config

Description Saves the system configuration so that it can be restored at a later time using

the restore system config command. The system configuration includes

the Interface Manager card, interfaces, and licensed features configuration.

This command overwrites any previously saved system configuration. After

entering this command, you are prompted to input whether you are sure you

want save the system configuration.

CAUTION: In I240 and above you can restore the configuration for two

major revisions back. For example I270 can restore configurations saved with

I260 and I250. Saving and restoring the configuration must be done with the

same version of the Interface Manager firmware for I232 and below. For

example, you cannot save the configuration with Interface Manager firmware

version I230, upgrade to version I231, and then restore the configuration.

NOTE: This command saves the configuration to the

IM_save_snapshot.zip file in the FTP directory.

Syntax save system config [force]

Availability All users and modes

Operands Specify force to skip the prompt asking if you are sure you want

to save the current system configuration. This operand is optional.

[force]

Examples To save the system configuration:

/>save system config

Caution: Saving the system configuration will overwrite the last

saved system configuration.

Do you really want to save the system configuration (y/n)? y

Saving the system configuration...done

To save the system configuration, skipping the prompt:

/>save system config force

Saving the system configuration...done