HP StoreEver MSL6480 Tape Library Chassis Fan Assembly Replacement (QU625-96306, June 2013)

HP StoreEver MSL6480 Tape

Library Chassis Fan Assembly

Replacement

Abstract

The chassis fan assembly is a mandatory customer self repair

part. HP customer self repair (CSR) programs allow you to

repair your StoreEver product. If a CSR part needs

replacing, HP ships the part directly to you so that you can

install it at your convenience. For more information about

CSR, contact your local service provider. For North America,

see the CSR website: www.hp.com/go/selfrepair

*QU625-96306*

HP Part Number: QU625-96306

Published: June 2013

Edition: 1

CAUTION: Parts can be damaged by

electrostatic discharge. Keep parts in

electrostatic containers until needed. Ensure you

are properly grounded when touching static

sensitive components.

Identifying the failed component

Using the OCP (operator control panel) or RMI (remote

management interface):

1. Activate the UID (Unit Identification) LEDs from

the Maintenance→UID LED Control screen. This

will illuminate the blue LED on the front and rear

of the base module to identify the library

containing the failed component.

2. Identify the module within the library that contains

the failed component:

a. In the upper left corner of the Home screen,

locate the module that indicates an error.

b. Click or tap the module for information on

the failed component.

Removing the chassis fan assembly

1. Loosen the two blue captive thumbscrews on the

chassis fan assembly.

2. Using the thumbscrews, slowly remove the chassis

fan assembly from the library.

Page 1

PAGE 1
HP StoreEver MSL6480 Tape Library Chassis Fan Assembly Replacement CAUTION: Parts can be damaged by electrostatic discharge. Keep parts in electrostatic containers until needed. Ensure you are properly grounded when touching static sensitive components. Abstract The chassis fan assembly is a mandatory customer self repair part. HP customer self repair (CSR) programs allow you to repair your StoreEver product.
PAGE 2
Installing the new chassis fan assembly Getting help 1. • HP Product information: www.hp.com/products/ tapestorage • HP technical support and phone numbers: www.hp.com/support • HP Library & Tape Tools (L&TT) diagnostic software: www.hp.com/support/tapetools 2. 3. Align the tabs on the library with the slots at the top of the chassis fan assembly. Push in the chassis fan assembly until it is flush with the back panel of the library.